iCarsoft VAWS V2.0 Audi / VW / Seat / Skoda Bildiagnostik

iCarsoft VAWS V2.0 Audi / VW / Seat / Skoda Bildiagnostik Felkodsläsare som även kan läsa av servicelampor och elektroniska bromsar EBP. Nu finns det Svenskt språk i menyn - uppdatera din programvara via icarsoft. Felkodsläsaren iCarsoft VAWS V2.0 kan släcka motorlampan och nollställa andra felkoder i din bil. En iCarsoft felkodsläsare som hittar i stort sett allt på dit Fordon. De system som stöds är bland annat: Fullständig systemdiagnos Olje Service Återställning Elektroniskt parkeringsbroms (EPB) systemunderhåll Batteriladdningssystem (BMS) Dieselpartikelfilter (DPF) Regenereringsstyrsystem Elektroniskt styrsystem (ETC) Styrvinkel Sensor (SAS) Kalibrering Läs och Rens DTC Läs Live Date Support Batteritest Support Data Granskning och Skriv ut

OBDII FUNCTION

1. Read Codes
2. Erase Codes
3. I/M Readiness – I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame – When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test – This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring – This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test – The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information – The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes 11.Turn off Check Engine Light (MIL), clear codes and reset monitors
11. Read live PCM DataStream
12. Support CAN (Controller Area Network) and all other
13. Multilingual menu and DTC definitions- English, Spanish and German. Swedish (update required).
14. Read pending DTCs
15. Read permanent DTCs
16. DTCs search
17. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
18. Works on most of 2001 and later OBDII compliant PETROL European vehicles
19. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
20. Works on most